| Image |
Replaces |
Description |
Price |
Cart |
Larger Image
|
Shindaiwa
20000-85200
|
| |
|
catalog #
|
7932 |
|
|
Fuel Cap Not Vented / Gas Cap |
Fuel cap replaces Shindaiwa 20000-85200 , 20000-85201
70043-85200 70043-85201
Used on models
22C 22F 22T
AH230 AH231 AHS231
C20 C24 C25, C27 C35 C230 C260 C270
EB240 EB240S EB480 EB500 EB501 EB630 EB630RT ES726
B45
LT20
F21, F222
LE230 LE 231 LE260 LE261 LT20
M230 M231 M2500
P230 P231 PB230 PB270
T20, T25, T27 T222 T230 T231 T231B T231X T231XB T2500 T2500X T260 T260B T261 T270 T272X
|
|
4.71 |
|
Larger Image
|
Shindaiwa
20040-85202
|
| |
|
catalog #
|
7931 |
|
|
9.81 |
|
Larger Image
|
Shindaiwa
20000-85303
|
| |
|
catalog #
|
7933 |
|
|
Fuel Tube Assembly |
Fuel tube assembly replaces Shindaiwa 20000-85303
20000-85313 20000-85002
Fits T-25, C25 & C35 model trimmers.
|
|
10.81 |
|
Larger Image
|
Shindaiwa
20011-85401
|
| |
|
catalog #
|
8534 |
|
|
17.30 |
|
Larger Image
|
Shindaiwa
20011-85451
|
| |
|
catalog #
|
8535 |
|
|
7.97 |
|
Larger Image
|
Shindaiwa
20000-85002
|
| |
|
catalog #
|
100100 |
|
|
Gas Tank Universal String Trimmer Fuel Tank With Brackets And Extra Fuel Line. |
Can be used to replace the following Shindaiwa part numbers. 20000-85002 20000-85003
Fits Shindaiwa Models C25 T25
When mounting to the T-25 you have to remove the front engine stand and use the mounting holes that now left open.
*Note the factory fuel tanks are no longer available.
I came up with this tank and brackets that can be used to fit many different string trimmers. As long as you are slightly mechanically minded it should not be to hard. Most machines have screw holes at the rear or on the bottom of the block that you can use. Kit also has extra fuel line that you may need to adapt to different machines.
If your currant tank has a fuel primer on the side of or between the carb and tank you may also need to add a in line primer our number 11510. Two fuel lines come out of the tank the smaller one is the suction line it has a fuel filter on the other end inside the fuel tank. It connects to the suction nipple on the carb. You may need to use a short piece of the yellow line as a coupler from the small line to the larger nipple on the carb. The larger line coming out of the tank is the return line so you don't squirt gas out on the ground. If not needed plug it off with a small screw or nail.
If you need help installing call Kevin 606-561-4983 late afternoon and evenings.
|
|
29.95 |
|
Larger Image
|
Shindaiwa
20036-81670
|
| |
|
catalog #
|
9478 |
|
|
2.40 |
|
Larger Image
|
Shindaiwa
20036-81670
|
| |
|
catalog #
|
9477 |
|
|
2.40 |
|
|
