|
Home :: 20-Fuel Line & Accessories Gas Caps, Fittings,Filters,Primer Bulbs
:: Shindaiwa
|
| |
Gas Tank Universal String Trimmer Fuel Tank With Brackets And Extra Fuel Line. |
|
Replaces the following part numbers
Shindaiwa 20000-85002
Can be used to replace the following Shindaiwa part numbers. 20000-85002 20000-85003
Fits Shindaiwa Models C25 T25
When mounting to the T-25 you have to remove the front engine stand and use the mounting holes that now left open.
*Note the factory fuel tanks are no longer available.
I came up with this tank and brackets that can be used to fit many different string trimmers. As long as you are slightly mechanically minded it should not be to hard. Most machines have screw holes at the rear or on the bottom of the block that you can use. Kit also has extra fuel line that you may need to adapt to different machines.
If your currant tank has a fuel primer on the side of or between the carb and tank you may also need to add a in line primer our number 11510. Two fuel lines come out of the tank the smaller one is the suction line it has a fuel filter on the other end inside the fuel tank. It connects to the suction nipple on the carb. You may need to use a short piece of the yellow line as a coupler from the small line to the larger nipple on the carb. The larger line coming out of the tank is the return line so you don't squirt gas out on the ground. If not needed plug it off with a small screw or nail.
If you need help installing call Kevin 606-561-4983 late afternoon and evenings.
|
 |
|
|
|
|
|
|
Catalog Number 100100 |
|
|
|
|
|
